• Home
  • Shop
  • Floor Milling
  • About
  • Contact
Heatflow Installations Ltd
  • Home
  • Shop
  • Floor Milling
  • About
  • Contact
Picture

Welcome to Our Shop!

Please note our prices are shown Excl VAT

Emmeti PE-RT 5 Layer Barrier Pipe 16mm x 2mm

£110.00 - £1,100.00

The Emmeti PE-RT 5 Layer Barrier Pipe using a PE-RT inner and outer later and an EVOH intermediate layer conforming to DIN 16837, ISO 24033 and DIN 4726. Maximum operating temperature 95°C, maximum operating pressure 8 bar.

Using a worldwide accepted protective construction, the PE-RT pipe has an inner and outer layer of PE-RT (Polyethylene of Raised Temperature) and an EVOH (Ethylene Vinyl-Alcohol Resin) middle layer. The EVOH layer prevents oxygen penetration in a heating system which reduces corrosion within the system thus reducing premature failure of system components.

Key benefits of using Emmeti Pipe

  • Easy to bend and secure into place
  • Suitable for use in general heating applications, maximum operating temperature 95°C, maximum operating pressure 8 bar
  • A wide range of complementary accessories to ensure trouble-free fitting
  • Available in size: 16mm x 2mm – 240m

A wide range of complementary accessories to ensure trouble-free fitting; including monoblocco pipe connectors, floor insulation, mounting rail, pipe staples, tacker gun and bend supports.

If ordering a 500m coil or multiple smaller coils, a pallet delivery will be required and this is not next working day and additional charges may apply, please call for further advice if required.

*Emmeti PE RT Pipe is for heating applications only.

*50 Year Warranty

-PALLET DELIVERY ONLY-

Shop

Reliance Pump and blending valve unit

£199.50

Reliance pump and blending valve unit with grundfos pump. To Connect to 1" Ball valve Manifold connections.

Shop

Watts Stainless steel underfloor heating manifold

£40.00 - £167.50

German Manufactured, Stainless steel Underfloor heating manifold. All Manifolds Supplied with End sets (with pressure gauge and auto air vent) and 1" Ball Valve set. Pipe connectors sold seperately.

Shop

Heatflow pipe decoiler

£285.00

Adjustable to fit all pipe coil diameter. Powder coated steel frame with bearing plate.

Shop

Pipe reaming tool

£10.00
Shop

Watts Eurocone Fitting 16 x 2.0mm

£1.10

Eurocone Fitting 16 x 2.0mm pack of 2

Shop

Underfloor Heating Pipe Clip Rail Self adhesive BULK BUY x100

£13.00 - £125.00

Underfloor Heating Pipe Clip Rail track is ideal when using warm water based underfloor heating within a screed or concrete floors.

Supplied in 1 mtr. lengths simply push together each length to extend and snap off at pre-scored points to the required length.

Shop

Pipe Bend Support 14-18mm

£1.20

Pipe Bend Support 14-18mm


Shop

Watts Manifold Extension Coupling (Pair)

£37.50

Manifold Extension Coupling (Pair)


Shop

Watts 1" Manifold end set with pressure gauge and auto air vent

£33.75

Watts 1" Manifold end set with pressure gauge and auto air vent

Shop

Watts Single port manifold extension kit

£31.50

To extend manifolds with 1” male thread with one heating circuit each.

Shop

Watts 1 " Ball valve set

£30.50

1 " Ball valve set to fit 1"manifold connection

Shop

CAD System drawings

£2.00

Customised CAD Drawings available to aid installation. Price calculated per SQM. Please contact us for more details or upload a dwg.file on the contact page specifying your requirements.

Shop

Hemming Technik Diamond Milling Blade

£110.00

Specially developed for radius milling in screed.

  • Diameter 125mm
  • Milling depth max. 25 mm
  • Width 17.0 mm for 16mm pipe
  • Bore 22.23mm
  • T-segment for tight curve radii

Scope of application:

  • Milling disc white for hard floors (screed)
  • Milling disc black for soft floors (sand/cement screed/anhydrite screed)

 

With extremely hard floors such as concrete, mastic asphalt screeds, fine stoneware or natural stone coverings, the physical limits in dry cutting are reached with the width of the discs. The milling discs get too hot and degrade.

Shop

Watts actuator, Model 22CX Normally Closed

£9.50


Electrothermic actuator, compact design with on/off action, compatible with thermostat adaptable radiator valves series TRV, 102M, 120B, valve for fan-coils series and regulation valves of Watts manifolds series HKV.


Cap made of flame retardant plastic. Cable 1m. Valve adaption: M30 x 1.5 chrome-plated brass threaded ring nut .  

Technical Features

  • Power consumption: 1,8W
  • Protection class: IP54
  • Actuator stroke: 3.5 mm
  • Valve stroke: 2,5 mm
  • Version 230V: 90 sec. (start).- 3 min. (end)
  • Valve connection: M30 x 1.5
Shop

Emmeti PE-RT 5 Layer Barrier Pipe 16mm x 2mm

£110.00 - £1,100.00

The Emmeti PE-RT 5 Layer Barrier Pipe using a PE-RT inner and outer later and an EVOH intermediate layer conforming to DIN 16837, ISO 24033 and DIN 4726. Maximum operating temperature 95°C, maximum operating pressure 8 bar.

Using a worldwide accepted protective construction, the PE-RT pipe has an inner and outer layer of PE-RT (Polyethylene of Raised Temperature) and an EVOH (Ethylene Vinyl-Alcohol Resin) middle layer. The EVOH layer prevents oxygen penetration in a heating system which reduces corrosion within the system thus reducing premature failure of system components.

Key benefits of using Emmeti Pipe

  • Easy to bend and secure into place
  • Suitable for use in general heating applications, maximum operating temperature 95°C, maximum operating pressure 8 bar
  • A wide range of complementary accessories to ensure trouble-free fitting
  • Available in size: 16mm x 2mm – 240m

A wide range of complementary accessories to ensure trouble-free fitting; including monoblocco pipe connectors, floor insulation, mounting rail, pipe staples, tacker gun and bend supports.

If ordering a 500m coil or multiple smaller coils, a pallet delivery will be required and this is not next working day and additional charges may apply, please call for further advice if required.

*Emmeti PE RT Pipe is for heating applications only.

*50 Year Warranty

-PALLET DELIVERY ONLY-

Shop

Reliance Pump and blending valve unit

£199.50

Reliance pump and blending valve unit with grundfos pump. To Connect to 1" Ball valve Manifold connections.

Shop

Watts Stainless steel underfloor heating manifold

£40.00 - £167.50

German Manufactured, Stainless steel Underfloor heating manifold. All Manifolds Supplied with End sets (with pressure gauge and auto air vent) and 1" Ball Valve set. Pipe connectors sold seperately.

Shop

Watts 1 " Ball valve set

£30.50

1 " Ball valve set to fit 1"manifold connection

Shop

Watts Single port manifold extension kit

£31.50

To extend manifolds with 1” male thread with one heating circuit each.

Shop

Watts 1" Manifold end set with pressure gauge and auto air vent

£33.75

Watts 1" Manifold end set with pressure gauge and auto air vent

Shop

Watts Manifold Extension Coupling (Pair)

£37.50

Manifold Extension Coupling (Pair)


Shop

Pipe Bend Support 14-18mm

£1.20

Pipe Bend Support 14-18mm


Shop

Underfloor Heating Pipe Clip Rail Self adhesive BULK BUY x100

£13.00 - £125.00

Underfloor Heating Pipe Clip Rail track is ideal when using warm water based underfloor heating within a screed or concrete floors.

Supplied in 1 mtr. lengths simply push together each length to extend and snap off at pre-scored points to the required length.

Shop
1 2

  • Home
  • Shop
  • Floor Milling
  • About
  • Contact